236 installations since 2005
Guyed mast
guyed mast or, as many say, with braces are used mainly for low-power wind turbines. This support consists of several segments with one or two levels of braces.Mast farm
The mast farm made of welded steel profiles. This type of support has the advantages inherent support without braces, such as high reliability and Easy service.
The cost of manufacturing the mast-farm lower compared with other supports without braces due to less material consumption. Despite the many advantages of this type of supports its use is quite limited because of the appearance of the disadvantages.
Pros mast-farm
• relatively low cost
• can be mounted without the use of a crane
• less resistance to wind flows in comparison with tapered legs
Cons mast-farm
• unattractive
• complexity and considerable time to assemble design
Additional Features
Height: 12 to 36 m
Used to wind turbines with a rotor diameter up to 16 m
Surface: zinc plating, painting, powder coating
Most of the species of our supports, you can also see here Completed projects.
In stock, production time and prices for wind turbine towers, you can call +38044 33 22 660 (contacts) or filling out an application on our website: Request an offer
Stepped mast
It stepped masts for wind turbines often buy our customers. Such support for wind turbine consists of 2-3 segments (tubes of different diameters). Segments are fastened together flanges. To improve the reliability of a design applied ribs.
It also supports the most popular model without braces. An important feature of this type of support is the ability to use them for a wide range of capacity wind turbines. Just like the previous type of supports has all the positive characteristics of braces and supports without significant reliability. Excellent value for money, appearance and functionality.
Pros stepped mast
• look better than the mast-farms and guyed towers
• High reliability design
• relatively quick and easy installation
Cons step support
• Mounting requires crane
Additional Features
Height: 9 to 36 m
Used to wind turbines with a rotor diameter up to 16 m
Surface: zinc plating, painting, painting + special coating, powder coating
Most of the wind turbines Winder lined with pillars on the step, so that in the Completed projects you can see many applications stepped masts.
In stock, production times and prices for wind turbine towers, you can call +38044 33 22 660 (contacts) or filling out an application on our website: Request an offer
Cone mast
Cone mast for a wind turbine characterized by the step that consists of a conically shaped segments for connecting flanges are not required. It tapered bearings are most often used for industrial wind turbines. For wind turbine rated power up to 20 kW cone masts are usually made in one piece — consist of one segment.
This mast looks beautiful, the design a little safer, but more expensive. Also, one of the drawbacks of this type of support is the high cost of transportation, as not folding prop (monolith).
Pros tapered mast
• stunning looks
• very fast installation (2-4 hours)
• High reliability design
Cons cone support
• for the installation of wind turbine requires crane
• maximum height of only 12 meters
• support not folding, respectively, for the transport of long-length required
Additional Features
Available in two versions: round and octagonal.
Height: 8 to 12 m
Used to wind turbines with a rotor diameter up to 8 meters
Surface: zinc plating, painting, painting a special coating +
In stock, production times and prices for wind turbine towers, you can call +38044 33 22 660 (contacts) or filling out an application on our website: Request an offer
Prop with billboard
If you want to support a wind turbine can be used as an advertising medium. It is ideal for own advertising construction companies and building materials stores.
Also, this type of advertising we recommend dealers and installers of products related to renewable energy. Such support with billboard can be placed at sites of construction of hypermarkets, which sell products in your company.
support with wind generator can be used to advertise third-party products and exhibitions. This decision draws attention to advertising on the board. Also wind turbine can provide stand-alone lighting advertising the board, which is especially important if you can not bring power.
You can buy the tower for your wind turbine with Bordeaux different sizes: advertising medium can be 1-3 third party.
Pros support with billboard
• draws attention to their appearance
• if necessary for independent coverage of advertising space
Cons support with billboard
• for the installation of wind turbine with a mast crane is required
Additional Features
Height: 8 to 24 meters.
Used to wind turbines with a rotor diameter up to 8 m
Surface: zinc plating, painting, painting a special coating
Most of the species of our supports, you can also see here Completed projects.
In stock, production times and prices for wind turbine towers, you can call +38044 33 22 660 (contacts) or filling out an application on our website: Request an offer
Mast with a spiral staircase
wind turbine has long been not only the power supply system, but also an indicator of a country house of the owner cares about the environment and following world trends.
In addition, wind turbine is a jewel gardening area. This was the impetus for the production of bearings with spiral staircases and lookout.
The company Winder can offer as standard equipment, and design of the spiral staircase and the observation deck, railing and stairs finish in accordance with the individual preferences of the client.
The basis for the installation of a spiral staircase is tapered or stepped support.
Pros tower with a spiral staircase
• the presence of the observation platform, is especially important when placed in a picturesque area
• individualization wind turbine project
• serviceability wind turbine without the use of a crane
Cons support with a spiral staircase
• the value of the support is higher than the price of a standard speed and tapered mast
Additional Features
Height: 12 to 30 m
Used to wind turbines with a rotor diameter 10 m
Surface: zinc plating, painting, painting a special coating +
Terms of production and prices for wind turbine towers, you can call +38044 33 22 660 (contacts) or filling out an application on our website: Request an offer