236 installations since 2005
Wind generator 12 kW (T120)
the Wind KZT120, intended for use in areas with normal annual average wind speed starting speed is 2.5 m, and the operating range of the speed 3-25 m/s the wind Turbine, rated power of 12 kW, often set to offline and the backup power supply of private homes with a high level of energy consumption, light industrial and warehouse premises, shops, gas stations. Windmill installation of KZT60, can be used for a network system without batteries (produced by windmill electricity is sold to the grid by the "green tariff" or replaces a part of the consumption from the network).
GeneratorType: three-phase synchronous PMG the Generator is a permanent magnet NdFeB the Settlement (nominal) power: 12 kW Maximum power: 14,2 kW rated voltage: 240V the Weight of generator: 567 kg |
Wheelrotor Diameter: 8 meter the Length of the blade: 3,95 m the area of the rotor: 50,3 square meters Number of blades: 3 PCs blade Material: fiberglass (composite) TSR (Tip Speed Ratio): 7 |
speed RangeStarting speed: 2.5 m/s rated speed: 11 m/s operating range: 3-25 m/s can Withstand wind up to: 45 m/s |
Securitythe Type of cooling: IC0041 the sealing: IP54 Temperature range: -30 to +60 C the wind Protection: controlled by the tail |
Advanced
Standard mast: 18, 24 meters speed
it is Possible to manufacture masts up to 30 meters under the order.
Warranty wind turbine: 1 year.
you can extend the warranty to 10 years.
the noise Level directly under wind installation: 20-48 dB
lifespan: 20 years
Vertical-axis wind turbine 5 kW
Vertical-axis wind turbine F16-05 is the most low-power model of the wind turbines of Belgian company Fairwind. Turbine F16-05- is three-bladed wind generator, the length of each blade is 4 m. Wind speed for this model -2.5 m / s. The construction of wind turbines Fairwind differs with ultra-reliability and can withstand winds up to 55 m/s
GeneratorType: three-phase synchronous PMG Generator of permanent NdFeB magnets Rated (nominal) power: 5 kW Maximum power: 5 kW Generator weight: 1085 kg |
Wind wheelRotor diameter: 4 meters Length of blades: 4 meters Rotor Area: 16 sq. meter Number of blades: 3 PCs Blade Material: aluminum |
The speed rangeStarting speed: 2.5 m/s Rated speed: 12 m/s Operating range: 2.5 to 30 m/s Withstands winds up to 55 m/s Rated speed: 165 rpm./min |
AdditionallyMast height: 12-18 m Production of masts up to 30 meters under the order Temperature range: -40 to +60 C Hurricane protection: automatic Working lifespan: 20 years |
Wind power generators of other manufacturers
Wind power generators Fortis Wind Energy
Fortis wind turbines manufactured in the Netherlands for more than 25 years. These wind turbines are considered to be among the quietest horizontal-axis (the noise level directly under the wind turbine at the level of 45 dB).
More than 4,000 wind turbines Fortis Wind Energy installed all over the world. Some machines are in operation continuously since 1984 and have full functionality to the present day.
- Select model:
- Fortis Passaat (1.4 kW)
- Fortis Montana (5 kW)
- Fortis Alize (10 kW)
On the links, you can go to the pages of each model, which shows the detailed specifications, settings, and the price of wind turbines Fortis Wind Energy.
Vertical wind turbines Fairwind
Vertical-axis wind turbines of Belgian company Fairwind - is, above all, European quality and reliability. There is no "any Chinese cog" in this wind turbine, the production of wind turbine blades and the assembly is carried out in Belgium, the generators are manufactured in Finland.
On the links, you can go to the pages of each model, which shows the detailed specifications, options, and the cost of wind turbines Fairwind.
Vertical wind turbines Queitrevolution
Queitrevolution - a British company with many years of experience in developing, manufacturing and installation of wind turbines of premium-class. Its vertical-axis wind turbine QR5 – is one of the most recognizable, differs with a modern design and impressive aerodynamics.
On the links, you can go to the page, which shows the detailed specifications, options, and the cost of vertical-axis wind turbine qr5.
Among the awards of the company Queitrevolution should be mentioned such authorities as a reward log Guardian 100 Cleantech 2008, Winner D&DA Product Design 2007, and Award of the Royal Academy of Engineering Mac Roberts short list in 2007.
Wind turbines Windelectric
The first wind turbines were developed in 1999 by a group of Ukrainian engineers. For 15 years were established more than 500 wind turbines, most of the machines are exported to France. Wind turbines Windelectric are for 100% Ukrainian production. Model is export-oriented, it is very reliable and require minimal maintenance, there is a possibility of remote distance monitoring and management system by GPRS-channel.
On the links, you can go to the pages of each model, which shows the detailed specifications, options, and the cost of wind turbines Windelectric.
Due to the unique design of the blades made of aluminum, the rotor diameter is reduced, balance and increased resistance to wear is improved, with no loss of efficiency of wind turbines. All models are controlled via the tail and have two independent systems of protection against strong winds.
You may also be interested in sections
The wind turbine 10 kW (E 100)
Wind Turbine E100 favorably with similar wind turbine power is very low starting wind speed - 2 m/s. Wind turbines with a nominal capacity of 10 kW, is set to power houses, of hotels, gas stations, mobile stations or network systems.
GeneratorType: three-phase synchronous PMG Generator of permanent NdFeB magn Rated (nominal) power: 10 kW Maximum power: 15,5 kW Rated voltage: 240V Generator weight: 354 kg |
Wind wheelRotor Diameter: 5.9 meters The length of the blade: 2.8 meters Rotor Area: 27.3 square meters Number of Blades: 3 pcs. Blades Material: duralumin Exposure to the wind: Automatic |
speed RangeStarting speed: 2 m/s rated speed: 12 m/s operating range: 2-30 m/s can Withstand wind up to: 45 m/s rated speed: 215.min |
ProtectionControl cabinet - SV50 Brake rotor: electrodynamic Temperature range: -40 to +60 C Hurricane protection: automatic |
Additionally
Standard mast: 12 meters, step
Manufacturing of masts up to 30 meters on order
The warranty for wind turbines: 3 years
The noise level directly under the wind turbine: 20-48 dB
Working lifespan: 20 years
Windmill 7kW (E 70)
Wind Turbine E70 is designed for use in areas with little annual average wind speed. Wind turbine with a nominal power of 7 kW, can be used for independent power supply of private houses, cottages, large gardens, light warehouses and manufacturing facilities, shopping or network systems (without batteries).
GeneratorType: three-phase synchronous PMG Generator of permanent NdFeB magnets Rated (nominal) power: 7 kW Maximum power: 9,5 kW Rated voltage: 240V Generator weight: 165 kg |
Wind wheelRotor Diameter: 4.8 meters The length of the blade: 2.2 meters Rotor Area: 18.1 square meters. meter Number of Blades: 3 pcs. Blade Material: duralumin Wind orientation: automatic |
speed RangeStarting speed: 2 m/s rated speed: 12 m/s operating range: 2-30 m/s can Withstand wind up to: 45 m/s rated speed: 260 rpm./min |
ProtectionControl cabinet - SV40 Brake rotor: electrodynamic Temperature range: -40 to +60 C Hurricane protection: automatic |
Additionally
Standard mast: 12 meters, step
Manufacturing of masts up to 30 meters on order.
The warranty for wind turbines: 3 years.
The noise level directly under the wind turbine: 20-48 dB
Working lifespan: 20 years
Windmill 2 kW (E 21)
Wind turbine E21 is designed for using in areas with little annual average wind speed. Starting wind speed for this wind turbine is 2 m/s. Wind turbine rated power of 2 kW used for backup power systems or, for example, independent power supply of a private house area of 100 sq.m.
GeneratorType: three-phase synchronous PMG Generator of permanent NdFeB magnets Rated (nominal) power: 2.1 kW Maximum power: 3.2 kW rRated voltage: 240V Generator weight: 54 kg |
Wind wheelRotor Diameter: 3.4 meters The length of the blade: 1.6 meters Rotor Area: 9.1 square meters. Number of blades: 3 PCs Blade Material: duralumin Wind orientation: automatic |
speed RangeStarting speed: 2 m/s Rated speed: 12 m/s Operating range: 2-30 m/s Braves wind up to 45 m/s Rated speed: 350 rpm./min |
ProtectionControl cabinet - SV10 Brake rotor: electrodynamic Temperature range: -40 to +60 C Hurricane protection: automatic |
Additionally
Standard mast: 12 meters, step
Manufacturing of masts up to 30 meters on order
The warranty for wind turbines: 3 yearss
The noise level directly under the wind turbine: 20-48 dB
Working lifespan: 20 years
